Mesenchymal Stem Cell Spheroids Research Articles

Enhanced potent immunosuppression of intracellular adipose tissue-derived stem cell extract by priming with three-dimensional spheroid formation

Immunomodulatory properties of mesenchymal stem cells are widely studied, supporting the use of MSCs as cell-based therapy in immunological diseases. This study aims to generate cell-free MSC extract and improves their immunomodulatory potential. Intracellular extracts were prepared from adipose-derived stem cells (ADSC) spheroid via a freeze-thawing method. The immunomodulatory capacities of ADSC spheroid extracts were investigated in vitro, including lymphocyte proliferation, T regulatory cell expansion, and macrophage assays. A comparative study was conducted with ADSC monolayer extract. The key immunomodulatory mediators presented in ADSC extract were identified. The results revealed that ADSC spheroid extract could suppress lymphocyte activation while enhancing T regulatory cell expansion. Immunomodulatory molecules such as COX-2, TSG-6, and TGF-β1 were upregulated in ADSC priming via spheroid culture. Selective inhibition of COX-2 abrogates the effect of ADSC extract on inducing T regulatory cell expansion. Thus, ADSC spheroid extract gains high efficacy in regulating the immune responses which are associated in part by COX-2 generation. Furthermore, ADSC spheroid extract possessed a potent anti-inflammation by manipulation of TNF-α production from LPS-activated macrophage. Our current study has highlighted the opportunity of using cell-free extracts from adipose tissue-derived mesenchymal stem cells spheroid as novel immunomodulators for the treatment of immunological-associated diseases.

Osteogenic differentiation of mesenchymal stem cell spheroids: A microfluidic device and electrochemiluminescence imaging study

Human mesenchymal stem cells (MSCs) have attracted attention as a major cellular source for regenerative medicine and preclinical studies. Three-dimensional (3D) cell culture systems can be used to construct physiologically relevant MSC spheroids with enhanced tissue regeneration capacity. However, what aspect of the MSC spheroids retains the regeneration capacity is not yet fully understood. Here, we induced osteoblast differentiation of MSC spheroids and investigated their respiratory activity using electrochemiluminescence (ECL) imaging developed in our previous study. In parallel, the ability of MSC spheroids to induce angiogenesis was investigated in a microfluidic device with a co-culture of endothelial cells. We found that the osteogenic differentiation of MSCs induced changes in their metabolic activity (respiratory activity of the spheroids decreased during differentiation) and lead to the loss of their angiogenesis-inducing ability. In other words, it is suggested that maintaining the stem cell nature with in the MSC spheroids is an important factor for tissue regeneration. In this study, we demonstrated the effective use of ECL imaging and microfluidic systems for the evaluation of MSC spheroids, providing new insights into stem cell tissue engineering.

Mesenchymal Stem Cell Spheroids: A Promising Tool for Vascularized Tissue Regeneration.

Mesenchymal stem cells (MSCs) are undifferentiated cells that can differentiate into specific cell lineages when exposed to the right conditions. The ability of MSCs to differentiate into particular cells is considered very important in biological research and clinical applications. MSC spheroids are clusters of MSCs cultured in three dimensions, which play an important role in enhancing the proliferation and differentiation of MSCs. MSCs can also participate in vascular formation by differentiating into endothelial cells and secreting paracrine factors. Vascularization ability is essential in impaired tissue repair and function recovery. Therefore, the vascularization ability of MSCs, which enhances angiogenesis and accelerates tissue healing has made MSCs a promising tool for tissue regeneration. However, MSC spheroids are a relatively new research field, and more research is needed to understand their full potential. In this review, we highlight the importance of MSC spheroids' vascularization ability in tissue engineering and regenerative medicine while providing the current status of studies on the MSC spheroids' vascularization and suggesting potential future research directions for MSC spheroids. Studies both in vivo and in vitro have demonstrated MSC spheroids' capacity to develop into endothelial cells and stimulate vasculogenesis. MSC spheroids show potential to enhance vascularization ability in tissue regeneration. Yet, further research is required to comprehensively understand the relationship between MSC spheroids and vascularization mechanisms.

Local delivery of stem cell spheroids with protein/polyphenol self-assembling armor to improve myocardial infarction treatment via immunoprotection and immunoregulation

Stem cell therapies have shown great potential for treating myocardial infarction (MI) but are limited by low cell survival and compromised functionality due to the harsh microenvironment at the disease site. Here, we presented a Mesenchymal stem cell (MSC) spheroid-based strategy for MI treatment by introducing a protein/polyphenol self-assembling armor coating on the surface of cell spheroids, which showed significantly enhanced therapeutic efficacy by actively manipulating the hostile pathological MI microenvironment and enabling versatile functionality, including protecting the donor cells from host immune clearance, remodeling the ROS microenvironment and stimulating MSC's pro-healing paracrine secretion. The underlying mechanism was elucidated, wherein the armor protected to prolong MSCs residence at MI site, and triggered paracrine stimulation of MSCs towards immunoregulation and angiogenesis through inducing hypoxia to provoke glycolysis in stem cells. Furthermore, local delivery of coated MSC spheroids in MI rat significantly alleviated local inflammation and subsequent fibrosis via mediation macrophage polarization towards pro-healing M2 phenotype and improved cardiac function. In general, this study provided critical insight into the enhanced therapeutic efficacy of stem cell spheroids coated with a multifunctional armor. It potentially opens up a new avenue for designing immunomodulatory treatment for MI via stem cell therapy empowered by functional biomaterials.

Regeneration of Rabbit Calvarial Defects with Combination of Stem Cells and Enamel Matrix Derivative: A Microcomputed Tomography and Histological Evaluation Comparing Two- and Three-Dimensional Cell Constructs.

Background and Objectives: This study addresses the challenge of bone regeneration in calvarial defects, exploring the efficacy of stem cell-based therapies and enamel matrix derivative (EMD) in tissue engineering. It assesses the regenerative potential of two- and three-dimensional cell constructs combined with mesenchymal stem cells (MSCs) and EMD in rabbit calvarial defects. Materials and Methods: This research involved the use of bone-marrow-derived MSCs cultured in silicon elastomer-based concave microwells to form spheroids. White rabbits were grouped for different treatments, with Group 1 as control, Group 2 receiving only EMD, Group 3 getting EMD plus stem cells, and Group 4 being treated with EMD plus stem cell spheroids. Computed tomography (CT) and microcomputed tomography (micro-CT) imaging were used for structural assessment, while histological evaluations were conducted using hematoxylin and eosin, Masson's trichrome, and Picro-sirius red staining. Results: CT and micro-CT analyses revealed varying degrees of bone regeneration among the groups. Group 4, treated with three-dimensional MSC spheroids and EMD, showed the most significant improvement in bone regeneration. Histological analyses corroborated these findings, with Group 4 displaying enhanced bone formation and better collagen fiber organization. Conclusions: The study supported the biocompatibility and potential efficacy of three-dimensional MSC constructs combined with EMD in bone regeneration. Further investigations are needed to confirm these findings and optimize treatment protocols.

Mesenchymal Stem Cell Spheroids Induced by Supramolecular Nanofibers for Diabetic Wound Healing

AbstractDiabetic wounds, which are a serious complication of diabetes, are a threat to most diabetic patients and there is a lack of satisfactory therapeutic strategies. Mesenchymal stem cell (MSC) spheroids are under intensive investigation and have emerged as a particularly promising clinical therapy to induce wound healing; however, clinical applications of MSC spheroids have lagged because of the difficulties related to proper preparation, in situ instruction and insufficient efficacy. Herein, a novel Biotin‐DFYIGSR supramolecular hydrogel is designed for three‐dimensional (3D) culture of MSCs, which enables monodispersed MSCs to form cell spheroids with high efficacy and is fairly suitable for quick spheroid harvest. MSC spheroids are demonstrated with enhanced paracrine function, which exhibited increased cell survival and promoted three overlapping stages of wound healing through the integrin α2β1 subunits. These spheroids not only accelerated the wound transition from the inflammatory phase to proliferation phase by inhibiting neutrophils and inducing M2 macrophage transition, but also promoted cell proliferation and neovascularization at wound sites to motivate skin regeneration. Ultimately, MSC spheroids achieved re‐epithelialization and collagen deposition for desirable wound closure. MSC spheroids induced by Biotin‐DFYIGSR are a facile solution for the safe and efficient treatment of diabetic wounds, with great potential for clinical application.

Exploring the Three-Dimensional Frontier: Advancements in MSC Spheroids and Their Implications for Breast Cancer and Personalized Regenerative Therapies.

To more accurately replicate the in vivo three-dimensional (3D) mesenchymal stem cell (MSC) niche and enhance cellular phenotypes for superior in vivo treatments, MSC functionalization through in vitro 3D culture approaches has gained attention. The organization of MSCs in 3D spheroids results in altered cell shape, cytoskeleton rearrangement, and polarization. Investigations have revealed that the survival and secretory capability of MSCs are positively impacted by moderate hypoxia within the inner zones of MSC spheroids. The spheroid hypoxic microenvironment enhances the production of angiogenic and anti-apoptotic molecules, including HGF, VEGF, and FGF-2. Furthermore, it upregulates the expression of hypoxia-adaptive molecules such as CXCL12 and HIF-1, inhibiting MSC death. The current review focuses on the latest developments in fundamental and translational research concerning three-dimensional MSC systems. This emphasis extends to the primary benefits and potential applications of MSC spheroids, particularly in the context of breast cancer and customized regenerative therapies.

Selective Accumulation of Poly(Lactic-Co-Glycolic Acid) Nanoparticles in Endotheliocytes and Mesenchymal Stromal Cells Cultured as Mixed-Cell Spheroids.

The use of drug-loaded nanoparticles is an actively developed approach in targeted cancer therapy. Prevascularized spheroids generated from mesenchymal stem cells and endotheliocytes are considered as a model to evaluate the tropism of therapeutic nanoparticles to a specific tissue. Nanoparticles based on co-polymer of lactic and glycolic acids (poly(lactic-co-glycolic acid; PLGA) labeled with cyanine dye (Cy5) were incubated with prevascularized spheroids, and the rate of their penetration and their distribution in the spheroid-forming cells were evaluated. Endotheliocytes more intensively accumulated nanoparticles than mesenchymal stem cells: the number of nanoparticles in mixed-cell spheroids of mesenchymal stem cells and endotheliocytes was greater than in spheroids built solely of mesenchymal stem cells by 5±1.2 times. The developed 3D in vitro cell model provides a low-cost way to assess tissue tropism of therapeutic nanoparticles under conditions closer to natural in comparison with 2D culture.

Distinctive Biological Properties between Mesenchymal Stem Cell Spheroids and Clumps of Mesenchymal Stem Cells/Extracellular Matrix Complexes in 3D Culture Systems

Background: Cells typically function and behave within a three-dimensional (3D) environment. Mesenchymal stem cells (MSCs), known for their self-renewal, multi-lineage differentiation capabilities, and paracrine effects, have garnered significant medical interest. MSC spheroid culture is widely adopted to study the biological properties of MSCs in a 3D context. In contrast, we previously developed 3D clumps of MSC/ECM complexes termed C-MSCs. C-MSCs consisted of cells and self-produced ECM proteins, allowing grafting into tissue defects without any artificial scaffolds. This present study aimed to elucidate the fundamental biological distinctions between 3D MSC spheroids and C-MSCs. Methods: MSC spheroids and C-MSCs are generated from human bone-marrow-derived MSCs. The physical properties, histological structures, and gene expression patterns were compared in vitro. Results: Macroscopic and histological examinations revealed that, whereas MSC spheroids are dense cell clusters primarily formed through Cadherin-mediated cell–cell interactions, C-MSCs are cell aggregates anchored by the ECM component COL1, enabling them to form larger structures. Furthermore, transcriptome analysis showed that C-MSCs possess enhanced capacities to produce immunomodulatory and cytoprotective factors, a prominent biological characteristic of MSCs. Conclusion: Recognizing the distinct attributes of each cell aggregate offers insights into the potential evolution of 3D cell culture techniques and possible therapeutic implications.

Human umbilical cord-derived mesenchymal stem cells (hUC-MSCs) alleviate excessive autophagy of ovarian granular cells through VEGFA/PI3K/AKT/mTOR pathway in premature ovarian failure rat model

BackgroundPremature ovarian failure (POF) is one of the leading causes of female infertility and is accompanied by abnormal endocrine, seriously affecting female quality of life. Previous studies have demonstrated that mesenchymal stem cells (MSCs) transplantation is a promising therapeutic strategy for POF. However, the mechanism remains obscure. This study aims to investigate the therapeutic effect of human umbilical cord-derived mesenchymal stem cells (hUC-MSCs) on ovarian function in the POF rat model and explore the underlying mechanisms.MethodsThe ovarian function was evaluated by ovarian morphology, histology, estrous cycle, hormone levels (AMH, E2, FSH, and LH), and fertility ability to investigate the effect of hUC-MSCs on the POF rats model. The cytokines levels were assayed in serum using protein array to explore the mechanisms of hUC-MSCs therapy for POF. The excessive autophagy levels were evaluated using a co-culture system of 3D MSCs spheroids with human ovarian granulosa cell line (KGN) or primary ovarian granulosa cells (GCs) to understand the paracrine effect of hUC-MSCs on GCs. The related proteins expression of autophagy and PI3K/AKT/mTOR pathway was detected using Western Blotting and/or in various inhibitors supplement to further demonstrate that vascular endothelial growth factor A (VEGFA) secreted by hUC-MSCs can alleviate excessive autophagy of ovarian GCs via PI3K/AKT/mTOR signaling pathway. The ovarian culture model in vitro was applied to confirm the mechanism.ResultsThe ovarian function of POF and the excessive autophagy of ovarian GCs were restored after hUC-MSCs transplantation. The protein array result demonstrated that VEGF and PI3K/AKT might improve ovarian function. in vitro experiments demonstrated that VEGFA secreted by hUC-MSCs could decrease oxidative stress and inhibit excessive autophagy of ovarian GCs via PI3K/AKT/mTOR pathway. The ovarian culture model results confirmed this mechanism in vitro.ConclusionThe hUC-MSCs can alleviate excessive autophagy of ovarian GCs via paracrine VEGFA and regulate the PI3K/AKT/mTOR signaling pathway, thereby improving the ovarian function of POF.

Self-assembled adipose-derived mesenchymal stem cells as an extracellular matrix component- and growth factor-enriched filler.

The clinical application of mesenchymal stem cells (MSCs) is attracting attention due to their excellent safety, convenient acquisition, multipotency, and trophic activity. The clinical effectiveness of transplanted MSCs is well-known in regenerative and immunomodulatory medicine, but there is a demand for their improved viability and regenerative function after transplantation. In this study, we isolated MSCs from adipose tissue from three human donors and generated uniformly sized MSC spheroids (∼100µm in diameter) called microblocks (MiBs) for dermal reconstitution. The viability and MSC marker expression of MSCs in MiBs were similar to those of monolayer MSCs. Compared with monolayer MSCs, MiBs produced more extracellular matrix (ECM) components, including type I collagen, fibronectin, and hyaluronic acid, and growth factors such as vascular endothelial growth factor and hepatocyte growth factor. Subcutaneously injected MiBs showed skin volume retaining capacity in mice. These results indicate that MiBs could be applied as regenerative medicine for skin conditions such as atrophic scar by having high ECM and bioactive factor expression.

Hybrid spheroids containing mesenchymal stem cells promote therapeutic angiogenesis by increasing engraftment of co-transplanted endothelial colony-forming cells in vivo

BackgroundPeripheral artery disease is an ischemic vascular disease caused by the blockage of blood vessels supplying blood to the lower extremities. Mesenchymal stem cells (MSCs) and endothelial colony-forming cells (ECFCs) have been reported to alleviate peripheral artery disease by forming new blood vessels. However, the clinical application of MSCs and ECFCs has been impeded by their poor in vivo engraftment after cell transplantation. To augment in vivo engraftment of transplanted MSCs and ECFCs, we investigated the effects of hybrid cell spheroids, which mimic a tissue-like environment, on the therapeutic efficacy and survival of transplanted cells.MethodsThe in vivo survival and angiogenic activities of the spheroids or cell suspension composed of MSCs and ECFCs were measured in a murine hindlimb ischemia model and Matrigel plug assay. In the hindlimb ischemia model, the hybrid spheroids showed enhanced therapeutic effects compared with the control groups, such as adherent cultured cells or spheroids containing either MSCs or ECFCs.ResultsSpheroids from MSCs, but not from ECFCs, exhibited prolonged in vivo survival compared with adherent cultured cells, whereas hybrid spheroids composed of MSCs and ECFCs substantially increased the survival of ECFCs. Moreover, single spheroids of either MSCs or ECFCs secreted greater levels of pro-angiogenic factors than adherent cultured cells, and the hybrid spheroids of MSCs and ECFCs promoted the secretion of several pro-angiogenic factors, such as angiopoietin-2 and platelet-derived growth factor.ConclusionThese results suggest that hybrid spheroids containing MSCs can serve as carriers for cell transplantation of ECFCs which have poor in vivo engraftment efficiency.

Injection of a PMMA-doped MSC spheroid gel for the treatment of painful osteoporotic vertebral compression fractures.

We aimed to develop a biocompatible treatment to overcome the limitations of polymethyl methacrylate (PMMA) vertebroplasty for osteoporotic compression fracture patients. We synthesized an injectable hydrogel containing PMMA. Mesenchymal stem cell (MSC) spheroids were included in the injectable PMMA-doped gel (= PMMA-doped spheroid gel). In vitro, the osteogenic/anti-inflammatory effects of the embedded spheroids were investigated by the quantitative real-time polymerase chain reaction method. In vivo, we used ovariectomy (OVX)-induced osteoporotic rats with injured femurs to investigate the pain-relief effects. The OVX rats were divided into four groups according to the materials injected (non, PMMA, PMMA gel, and PMMA-spheroid gel) into the lesion. The immunofluorescence (IF) intensity levels of painful markers in dorsal root ganglia (DRG) were measured. In vitro, a volumetric ratio of the gel of 8 (gel):2 (PMMA) was non-cytotoxic for MSCs and promoted the expression of osteogenic/anti-inflammatory markers. In vivo, the values of several bone parameters in the PMMA-doped spheroid gel group showed remarkable increases compared to those in the PMMA group. In addition, the IF intensity levels of the painful markers were noticeably decreased in the PMMA-spheroid gel group. We, therefore, suggest that this treatment can be useful for osteoporotic vertebral compression fracture patients.

Scalable and Uniform Fabrication of Dexamethasone-Eluting Depot-Engineered Stem Cell Spheroids as a Microtissue Construct to Target Bone Regeneration.

Potentiation of stem cell potency is critical for successful tissue engineering, especially for bone regeneration. Three-dimensional cell culture and bioactive molecule co-delivery with cells have been proposed to achieve this effect. Here, we provide a uniform and scalable fabrication of osteogenic microtissue constructs of mesenchymal stem cell (MSC) spheroids surface-engineered with dexamethasone-releasing polydopamine-coated microparticles (PD-DEXA/MPs) to target bone regeneration. The microparticle conjugation process was rapid and cell-friendly and did not affect the cell viability or key functionalities. The incorporation of DEXA in the conjugated system significantly enhanced the osteogenic differentiation of MSC spheroids, as evidenced by upregulating osteogenic gene expression and intense alkaline phosphatase and alizarin red S staining. In addition, the migration of MSCs from spheroids was tested on a biocompatible macroporous fibrin scaffold (MFS). The result showed that PD-DEXA/MPs were stably anchored on MSCs during cell migration over time. Finally, the implantation of PD-DEXA/MP-conjugated spheroid-loaded MFS into a calvarial defect in a mouse model showed substantial bone regeneration. In conclusion, the uniform fabrication of microtissue constructs containing MSC spheroids with drug depots shows a potential to improve the performance of MSCs in tissue engineering.

Chitosan–Vitamin C Complex: A Nature-Inspired Adhesive for Bonding Poly(methyl methacrylate) Devices for Biomedical Applications

In our ongoing efforts to develop a biocompatible adhesive for thermoplastic bonding, we have introduced a chitosan–vitamin C (CSVC) hydrogel as a non-toxic adhesive reagent for bonding poly(methyl methacrylate) (PMMA). The bonding approach was successfully conducted using the CSVC hydrogel assisted by mild pressure for 20 min at room temperature. Hydrogen bonding and ionic cross-linking between CSVC and PMMA are suggested to be the prominent chemical interactions that accelerate the robust bonding of PMMA substrates. The hydrophilic modifications of PMMA by the CSVC hydrogel were confirmed by water contact angle analysis, Fourier-transform infrared spectroscopy, and scanning electron microscopy. Notably, the highest bond strength was achieved up to 1.48 MPa with perfect bonding performance characterized by clog-free and leak-proof microchannels. The bonded microdevices were applied to on-chip culturing of mesenchymal stem cells (MSCs), which can effectively promote the formation of MSC spheroids. Thus, the CSVC hydrogel is a promising nature-inspired adhesive that is expected to give a great impulse to the development of microdevices for advanced biomedical applications.

A cytokine-induced spheroid-based in vitro model for studying osteoarthritis pathogenesis.

Given the lack of in vitro models faithfully reproducing the osteoarthritis (OA) disease on-set, this work aimed at manufacturing a reliable and predictive in vitro cytokine-based Articular Cartilage (AC) model to study OA progression. Cell spheroids of primary human fetal chondrocytes (FCs) and h-TERT mesenchymal stem cells differentiated chondrocytes (Y201-C) were analysed in terms of growth kinetics, cells proliferation and apoptosis over 10 days of culture, in healthy condition or in presence of cytokines (interleukin-1ß, -6 and TNF-α). Then, the spheroids were assembled into chondrospheres using a bottom-up strategy, to obtain an in vitro cytokines-induced OA model. The resulting chondrospheres were evaluated for gene expression and anabolic ECM proteins. Compared to the healthy environment, the simulated OA environment induced chondrocyte hyperproliferation and apoptotic pathway, decreased expression of anabolic ECM proteins, and diminished biosynthetic activity, resembling features of early-stage OA. These characteristics were observed for both Y201-C and HC at high and low concentrations of cytokines. Both HC and Y201-C demonstrated the suitability for the manufacturing of a scaffold-free in vitro OA model to facilitate studies into OA pathogenesis and therapeutic strategies. Our approach provides a faithful reproduction of early-stage osteoarthritis, demonstrating the ability of obtaining different disease severity by tuning the concentration of OA-related cytokines. Given the advantages in easy access and more reproducible performance, Y201-C may represent a more favourable source of chondrocytes for establishing more standardized protocols to obtain OA models.

COMPOSITE BIOINKS THAT CAN BE INJECTED OR 3D BIOPRINTED TO AID OSTEOCHONDRAL DEFECT REPAIR

As arthroplasty demand grows worldwide, the need for a novel cost-effective treatment option for articular cartilage (AC) defects tailored to individual patients has never been greater. 3D bioprinting can deposit patient cells and other biomaterials in user-defined patterns to build tissue constructs from the “bottom-up,” potentially offering a new treatment for AC defects. The aim of this research was to create bioinks that can be injected or 3D bioprinted to aid osteochondral defect repair using human cells.Novel composite bioinks were created by mixing different ratios of methacrylated alginate (AlgMA) with methacrylated gelatin (GelMA). Chondrocytes or mesenchymal stem cells (MSCs) were then encapsulated in the bioinks and 3D bioprinted using a custom-built extrusion bioprinter. UV and double-ionic (BaCl2 and CaCl2) crosslinking was deployed following bioprinting to strengthen bioink stability in culture. Chondrocyte and MSC spheroids were also bioprinted to accelerate cell growth and development of ECM in bioprinted constructs.Excellent viability of chondrocytes and MSCs was seen following bioprinting (>95%) and maintained in culture over 28 days, with accelerated cell growth seen with inclusion of MSC or chondrocyte spheroids in bioinks (p<0.05). Bioprinted 10mm diameter constructs maintained shape in culture over 28 days, whilst construct degradation rates and mechanical properties were improved with addition of AlgMA (p<0.05). Composite bioinks were also injected into in vitro osteochondral defects (OCDs) and crosslinked in situ, with maintained cell viability and repair of osteochondral defects seen over a 14-day period.In conclusion we developed novel composite AlgMA/GelMA bioinks that can be triple-crosslinked, facilitating dense chondrocyte and MSC growth in constructs following 3D bioprinting. The bioink can be injected or 3D bioprinted to successfully repair in vitro OCDs, offering hope for a new approach to treating AC defects.

COMPOSITE BIOINKS THAT CAN BE INJECTED OR 3D BIOPRINTED TO AID OSTEOCHONDRAL DEFECT REPAIR

As arthroplasty demand grows worldwide, the need for a novel cost-effective treatment option for articular cartilage (AC) defects tailored to individual patients has never been greater. 3D bioprinting can deposit patient cells and other biomaterials in user-defined patterns to build tissue constructs from the “bottom-up,” potentially offering a new treatment for AC defects. The aim of this research was to create bioinks that can be injected or 3D bioprinted to aid osteochondral defect repair using human cells.Novel composite bioinks were created by mixing different ratios of methacrylated alginate (AlgMA) with methacrylated gelatin (GelMA). Chondrocytes or mesenchymal stem cells (MSCs) were then encapsulated in the bioinks and 3D bioprinted using a custom-built extrusion bioprinter. UV and double-ionic (BaCl2 and CaCl2) crosslinking was deployed following bioprinting to strengthen bioink stability in culture. Chondrocyte and MSC spheroids were also produced via 3D culture and then bioprinted to accelerate cell growth and development of ECM in bioprinted constructs.Excellent viability of chondrocytes and MSCs was seen following bioprinting (>95%) and maintained in culture over 28 days, with accelerated cell growth seen with inclusion of MSC or chondrocyte spheroids in bioinks (p<0.05). Bioprinted 10mm diameter constructs maintained shape in culture over 28 days, whilst construct degradation rates and mechanical properties were improved with addition of AlgMA (p<0.05). Composite bioinks were also injected into in vitro osteochondral defects (OCDs) and crosslinked in situ, with maintained cell viability and repair of osteochondral defects seen over a 14-day period. In conclusion we developed novel composite AlgMA/GelMA bioinks that can be triple-crosslinked, facilitating dense chondrocyte and MSC growth in constructs following 3D bioprinting. The bioink can be injected or 3D bioprinted to successfully repair in vitro OCDs, offering hope for a new approach to treating AC defects.

Structuring supramolecular hyaluronan hydrogels via peptide self-assembly for modulating the cell microenvironment.

The use of synthetic extracellular matrices (ECMs) in fundamental in vitro cell culture studies has been instrumental for investigating the interplay between cells and matrix components. To provide cells with a more native environment in vitro, it is desirable to design matrices that are biomimetic and emulate compositional and structural features of natural ECMs. Here, the supramolecular fabrication of peptide-hyaluronan (HA) hydrogels is presented as potential ECM surrogates, combining native HA and rationally designed cationic amphipatic peptides [(KI)nK, lysine (K), isoleucine (I), n​=​2-6] whose mechanical properties and microstructure are tunable by the peptide sequence. (KI)nK peptides adopt β-sheet configuration and self-assemble into filamentous nanostructures triggered by pH or ionic strength. The self-assembly propensity of (KI)nK peptides increases with the sequence length, forming single phase hydrogels (shorter peptides) or with phase separation (longer peptides) in presence of the anionic polyelectrolyte HA through electrostatic complexations. The gel phase formed in (KI)nK-HA complexes exhibits viscoelastic behavior and triggers the formation of human mesenchymal stem cell (MSC) spheroids which disassemble over the time. It is anticipated that these (KI)nK-HA hydrogels with tunable physical and biochemical properties offer a promising platform for in vitro applications and in stem cell therapy.

Additively manufactured polyethylene terephthalate scaffolds for scapholunate interosseous ligament reconstruction

The regeneration of the ruptured scapholunate interosseous ligament (SLIL) represents a clinical challenge. Here, we propose the use of a Bone-Ligament-Bone (BLB) 3D-printed polyethylene terephthalate (PET) scaffold for achieving mechanical stabilisation of the scaphoid and lunate following SLIL rupture. The BLB scaffold featured two bone compartments bridged by aligned fibres (ligament compartment) mimicking the architecture of the native tissue. The scaffold presented tensile stiffness in the range of 260 ± 38 N/mm and ultimate load of 113 ± 13 N, which would support physiological loading. A finite element analysis (FEA), using inverse finite element analysis (iFEA) for material property identification, showed an adequate fit between simulation and experimental data. The scaffold was then biofunctionalized using two different methods: injected with a Gelatin Methacryloyl solution containing human mesenchymal stem cell spheroids (hMSC) or seeded with tendon-derived stem cells (TDSC) and placed in a bioreactor to undergo cyclic deformation. The first approach demonstrated high cell viability, as cells migrated out of the spheroid and colonised the interstitial space of the scaffold. These cells adopted an elongated morphology suggesting the internal architecture of the scaffold exerted topographical guidance. The second method demonstrated the high resilience of the scaffold to cyclic deformation and the secretion of a fibroblastic related protein was enhanced by the mechanical stimulation. This process promoted the expression of relevant proteins, such as Tenomodulin (TNMD), indicating mechanical stimulation may enhance cell differentiation and be useful prior to surgical implantation. In conclusion, the PET scaffold presented several promising characteristics for the immediate mechanical stabilisation of disassociated scaphoid and lunate and, in the longer-term, the regeneration of the ruptured SLIL.